I am so happy with the used equipment I purchased last week. Less than two years old. Great shape! I am so lucky!
Adjustable A-Frame
The side walls of the A-frame are 3' wide and 9' long and made from 1 1/2" square aluminum tubing skinned with wood sand painted. The aluminum frame doesn't require painting. Includes a large diameter rod for connecting the side walls, two corrosive-resistant chains and s-hooks for attaching the chains to the side walls. By shortening or lengthening the chains, you can set the apex at regulation height or at any lower height for training.
Adjustable Dog Walk
Aluminum base - lightweight, never need painting, and won't rust. Each base folds up flat for easy transportation and storage. By adjusting the chain that connects the legs of the dog walk bases, you can set the height of the middle plank at regulation height or at any lower height down to only inches off the ground for training purposes. The substructure of the 12 ft planks is solid aluminum skinned with wood sand painted. The middle plank has hinges for attaching it to the bases and the up and down ramps.
Adjustable See-Saw
See-saw base is manufactured from steel for weight and so it will long outlast traditional wooden bases. It weighs 25lbs. (just the base) and folds up flat for portability and easy storage. Powder-coat painted base. By shortening or lengthening the chain that connects the legs of this see-saw base, you can set the pivot point at various heights for training and regulation height for competition. The substructure of the 12 ft plank is solid aluminum and is skinned with wood sand painted. (Not included: See Saw anchors for securing the See Saw during trials. Anchors fit over the ends of the base and have spiked tips so you can drive them into the ground. The stabilizer bar is used to keep the See Saw fixed at the 24" competition height. Great at trials as it provides more stability and saves time.)
Tunnel
Open tunnel 24" in diameter 20' length made from heavy-duty material that is used for air ducts in mine shafts. The material is a scrim - vinyl coated and reinforced with steel rings. UV resistance and anti-microbial treatments insure longevity. Durable with a thick wire sewn into the fabric. Has grommet tabs so the tunnel can be staked into the ground or attached to a tunnel holder with a short bungee. Mine have sandbags not tunnel holders. (Two)
Collapsed Tunnel (Barrel and Stand)
Collapsed tunnel consists of a 25" diameter heavy-duty plastic barrel bolted to an aluminum stand. The stand is sturdy and yet compact, lightweight and requires absolutely no maintenance. The barrel comes with a locking ring and a bungee for attaching a chute. To give dogs more traction, the floor is covered with non-skid tape. The chute is made from durable nylon pack-cloth. Regulation AKC/USDAA 12' long chute with sandbag pockets to help in windy conditions.
Weave Poles
Competition Base - No agility obstacle is more difficult for dogs to master than the poles. There are many methods of training the poles and this versatile base handles them all. The competition base is the traditional set-up where all poles are in a straight line. 22" spacing (allowed in all agility competitions). Two sets of six each.
Bendable Knuckles
The rigid weave pole base can be converted into the weave-a-matic training system.
Steel Pause Table
Adjustable pause table made from steel. 36" by 36" square top with a 3" fascia. All joints are professionally welded. 1/2" primed plywood attached to the tabletop which is primed, painted and sand coated. Table base, the tabletop frame, and all the legs painted with a rust-preventative primer, then powder coat everything. The table comes with three sets of steel legs so it can be adjusted to different heights.
Legs for Pause Table
8, 16, and 24 inches
Long Jump
High Tech Plastic Regulation, Weight 50 lbs
Aluminum Tire Jump
Extremely portable and easy to set up and break down. The frame of the tire jump is comprised of four sections of square aluminum tubing. You can set up the tire in seconds and one person can quickly change the height of the tire without assistance. Includes: Tire, wrapped with colored vinyl tape, stainless steel bolts for locking the frame sections in place, and a hook and wire and bungee cords for suspending the tire in the frame. NADAC or AKC Specification - 24" Tire
Triple Jump
Lightweight, portable yet sturdy and made out of a new COMPOSITE MATERIAL which eliminates the required maintenance and care of traditional wood versions. Each jump comes with pole supports and four 5' striped poles. Sides can be detached from the uprights in seconds, so you can easily transport a number of these jumps and store them compactly. The uprights are 32" tall and made of solid aluminum stock. The sides (approximately 26.5" wide) attach to the uprights using two stainless steel bolts and wing nuts.
Double Jump
Lightweight, portable yet sturdy and made out of a new COMPOSITE MATERIAL which eliminates the required maintenance and care of traditional wood versions. Each jump comes with pole supports and three 5' striped poles. Sides can be detached from the uprights in seconds, so you can easily transport a number of these jumps and store them compactly. The uprights are 32" tall and made of solid aluminum stock. The sides (approximately 15" wide) attach to the uprights using two stainless steel bolts and wing nuts.
PVC Jump
Non-winged jumps have 3' tall uprights made from furniture-grade PVC. The jump comes with two 5' PVC striped poles. Poles are easily displaceable and are supported by PVC Jump Cup Strips. You can adjust the poles in increments from 4" to 26". The jumps are designed so that the bases can be connected to create a spread jump. The bases are removable for easy transportation and storage. Set of 5 jumps.
PVC Non-Wing Economy Jump
Made from the same furniture grade PVC pipe, this less expensive version of the competition non-wing jump is great for home use but it is built to regulation specifications so it can be used in a trial in a pinch. The jump comes with two 4' PVC striped poles. The jump comes with jump cups strip to hold bars at lengths every 2" from 4 inch to 26 inch. Set of 5 jumps.
Free Standing Wing Jump
Convert wingless jumps to winged jumps easily with these free-standing wings made with sturdy, lightweight PVC and lattice. Designed to straddle any foot that may extend from your non-wing jump. Feet are removable for transportation and storage. Two sets of 2.
Obstacle Markers (A-Frame Style Markers)
Made from 10" A-Frame shaped high tech plastic with weather-resistant 3" high numbers. The Frames can be stacked for portability and easy storage. One set 1-20 with carrying case.
